Initial Commit
This commit is contained in:
SSAnkur committed
commit
9e26519e61
2 files changed
+244
No files matched your search
@@ -0,0 +1,4 @@
|
||||
[env:sht41]
|
||||
platform = nordicnrf52
|
||||
board = adafruit_feather_nrf52840
|
||||
framework = arduino
|
||||
+240
@@ -0,0 +1,240 @@
|
||||
/*
|
||||
BTHome v2 temperature / humidity beacon – ultra-low-power
|
||||
------------------------------------------------------------
|
||||
Board : Pro Micro nRF52840 (nice!nano v2 compatible), powered by CR2032
|
||||
Sensor : Adafruit SHT41 (I2C addr 0x44), power-gated from a GPIO
|
||||
Core : Adafruit nRF52 Arduino core
|
||||
Tools > Board > "Adafruit Feather nRF52840 Express"
|
||||
(same UF2 bootloader + S140 SoftDevice as the nice!nano)
|
||||
|
||||
Behaviour
|
||||
- Measures T/RH + battery voltage every 60 s
|
||||
- Sensor is powered ONLY during the measurement (~15 ms)
|
||||
- Non-connectable BTHome v2 advertisement every 10 s
|
||||
- DC/DC enabled on REG0 (VDDH->VDD) and REG1 (VDD->1.3 V core)
|
||||
- CPU sleeps (FreeRTOS tickless idle -> sd_app_evt_wait) the rest of the time
|
||||
|
||||
All pins below are RAW nRF GPIO numbers (port * 32 + pin), driven directly
|
||||
through registers, so the Feather pin mapping does not matter.
|
||||
*/
|
||||
|
||||
#include <bluefruit.h>
|
||||
|
||||
// ---------------- user settings ----------------
|
||||
#define SENS_PWR_PIN 17 // P0.17 (Pro Micro "D2" / "017") -> SHT41 VIN
|
||||
#define SENS_SDA_PIN 20 // P0.20 (Pro Micro "D3" / "020") -> SHT41 SDA
|
||||
#define SENS_SCL_PIN 22 // P0.22 (Pro Micro "D4" / "022") -> SHT41 SCL
|
||||
|
||||
#define MEAS_INTERVAL_MS 60000UL // measurement period
|
||||
#define ADV_INTERVAL 16000 // 10000 ms / 0.625 ms
|
||||
#define TX_POWER_DBM 0 // -40,-20,-16,-12,-8,-4,0,2..8 (lower = less power, less range)
|
||||
#define DEVICE_NAME "SHT41"
|
||||
|
||||
#define SHT41_ADDR 0x44
|
||||
#define SHT41_CMD_MEAS_HP 0xFD // high precision, no heater (max 8.3 ms)
|
||||
|
||||
// ---------------- state ----------------
|
||||
static int16_t g_temp10 = 0; // °C * 10 (BTHome 0x45)
|
||||
static uint8_t g_rh = 0; // %RH, 1 % (BTHome 0x2E)
|
||||
static uint16_t g_battMv = 0; // mV (BTHome 0x0C)
|
||||
static uint8_t g_i2cBuf[6]; // EasyDMA buffer (must be RAM): TX = cmd byte, RX = 6 data bytes
|
||||
|
||||
// =====================================================================
|
||||
// Helpers
|
||||
// =====================================================================
|
||||
#define PIN_CNF(dir, in, pull, drive) \
|
||||
((GPIO_PIN_CNF_DIR_##dir << GPIO_PIN_CNF_DIR_Pos) | \
|
||||
(GPIO_PIN_CNF_INPUT_##in << GPIO_PIN_CNF_INPUT_Pos) | \
|
||||
(GPIO_PIN_CNF_PULL_##pull << GPIO_PIN_CNF_PULL_Pos) | \
|
||||
(GPIO_PIN_CNF_DRIVE_##drive << GPIO_PIN_CNF_DRIVE_Pos))
|
||||
#define CNF_HIGHZ PIN_CNF(Input, Disconnect, Disabled, S0S1) // no input buffer, no pull: ~0 leakage
|
||||
#define CNF_I2C PIN_CNF(Input, Connect, Pullup, S0D1) // open-drain + internal pull-up (backup)
|
||||
#define CNF_PWR PIN_CNF(Output, Disconnect, Disabled, H0H1) // high-drive push-pull
|
||||
|
||||
static NRF_GPIO_Type* port(uint32_t pin) { return (pin & 32) ? NRF_P1 : NRF_P0; }
|
||||
static void pinCfg(uint32_t pin, uint32_t cnf) { port(pin)->PIN_CNF[pin & 31] = cnf; }
|
||||
static void busPins(uint32_t cnf) { pinCfg(SENS_SDA_PIN, cnf); pinCfg(SENS_SCL_PIN, cnf); }
|
||||
|
||||
static void sensorPower(bool on) { // set level first, then make it an output (no glitch)
|
||||
NRF_GPIO_Type* p = port(SENS_PWR_PIN);
|
||||
(on ? p->OUTSET : p->OUTCLR) = 1UL << (SENS_PWR_PIN & 31);
|
||||
pinCfg(SENS_PWR_PIN, CNF_PWR);
|
||||
}
|
||||
|
||||
static void sensorOff() { // bus high-Z BEFORE removing power (no back-feeding)
|
||||
busPins(CNF_HIGHZ);
|
||||
sensorPower(false); // held low = sensor fully off
|
||||
}
|
||||
|
||||
// Clear event, fire task, wait (with timeout) for the event
|
||||
static void trigger(volatile uint32_t& task, volatile uint32_t& evt, uint32_t timeoutMs) {
|
||||
evt = 0;
|
||||
task = 1;
|
||||
for (uint32_t t0 = millis(); !evt && millis() - t0 < timeoutMs; ) {}
|
||||
}
|
||||
|
||||
// =====================================================================
|
||||
// Minimal TWIM (I2C master) – enabled only during a measurement
|
||||
// =====================================================================
|
||||
static bool twimRun(volatile uint32_t& task, uint32_t shorts) {
|
||||
NRF_TWIM0->EVENTS_STOPPED = 0;
|
||||
NRF_TWIM0->EVENTS_ERROR = 0;
|
||||
NRF_TWIM0->SHORTS = shorts;
|
||||
task = 1;
|
||||
|
||||
uint32_t t0 = millis();
|
||||
while (!NRF_TWIM0->EVENTS_STOPPED && !NRF_TWIM0->EVENTS_ERROR && millis() - t0 <= 20) {}
|
||||
|
||||
bool ok = NRF_TWIM0->EVENTS_STOPPED && !NRF_TWIM0->EVENTS_ERROR;
|
||||
if (!ok) { // NACK / bus error / timeout: force STOP
|
||||
trigger(NRF_TWIM0->TASKS_STOP, NRF_TWIM0->EVENTS_STOPPED, 5);
|
||||
NRF_TWIM0->ERRORSRC = NRF_TWIM0->ERRORSRC; // write-1-to-clear
|
||||
NRF_TWIM0->EVENTS_ERROR = 0;
|
||||
}
|
||||
NRF_TWIM0->EVENTS_STOPPED = 0;
|
||||
return ok;
|
||||
}
|
||||
|
||||
static uint8_t shtCrc(const uint8_t* d) { // CRC-8, poly 0x31, init 0xFF
|
||||
uint8_t crc = 0xFF;
|
||||
for (int i = 0; i < 2; i++) {
|
||||
crc ^= d[i];
|
||||
for (int b = 0; b < 8; b++) crc = (crc & 0x80) ? (crc << 1) ^ 0x31 : (crc << 1);
|
||||
}
|
||||
return crc;
|
||||
}
|
||||
|
||||
// =====================================================================
|
||||
// SHT41 measurement with power gating (updates g_temp10 / g_rh on success)
|
||||
// =====================================================================
|
||||
static bool readSHT41() {
|
||||
uint8_t* b = g_i2cBuf;
|
||||
|
||||
sensorPower(true);
|
||||
busPins(CNF_I2C);
|
||||
delay(3); // SHT41 power-up <1 ms + breakout caps
|
||||
NRF_TWIM0->ENABLE = TWIM_ENABLE_ENABLE_Enabled;
|
||||
|
||||
b[0] = SHT41_CMD_MEAS_HP;
|
||||
bool ok = twimRun(NRF_TWIM0->TASKS_STARTTX, TWIM_SHORTS_LASTTX_STOP_Msk);
|
||||
if (ok) {
|
||||
delay(10); // CPU sleeps during conversion
|
||||
ok = twimRun(NRF_TWIM0->TASKS_STARTRX, TWIM_SHORTS_LASTRX_STOP_Msk) &&
|
||||
shtCrc(b) == b[2] && shtCrc(b + 3) == b[5];
|
||||
}
|
||||
|
||||
NRF_TWIM0->ENABLE = TWIM_ENABLE_ENABLE_Disabled;
|
||||
sensorOff(); // power down before doing the math
|
||||
if (!ok) return false;
|
||||
|
||||
// T = -45 + 175*raw/65535 (0.1 °C units), RH = -6 + 125*raw/65535 (1 %), one rounding step
|
||||
uint32_t rawT = (b[0] << 8) | b[1];
|
||||
uint32_t rawRH = (b[3] << 8) | b[4];
|
||||
g_temp10 = -450 + (int32_t)((1750UL * rawT + 32767UL) / 65535UL);
|
||||
int32_t rh = -6 + (int32_t)((125UL * rawRH + 32767UL) / 65535UL);
|
||||
g_rh = constrain(rh, 0, 100);
|
||||
return true;
|
||||
}
|
||||
|
||||
// =====================================================================
|
||||
// Battery voltage: VDDH/5 via SAADC (no external divider needed)
|
||||
// =====================================================================
|
||||
static uint16_t readBatteryMv() {
|
||||
static volatile int16_t result;
|
||||
static bool calibrated = false;
|
||||
|
||||
NRF_SAADC->RESOLUTION = SAADC_RESOLUTION_VAL_12bit;
|
||||
NRF_SAADC->OVERSAMPLE = SAADC_OVERSAMPLE_OVERSAMPLE_Over8x;
|
||||
NRF_SAADC->CH[0].CONFIG = // + internal 0.6 V ref, single-ended, no R (all 0)
|
||||
(SAADC_CH_CONFIG_GAIN_Gain1_2 << SAADC_CH_CONFIG_GAIN_Pos) | // range 0..1.2 V
|
||||
(SAADC_CH_CONFIG_TACQ_10us << SAADC_CH_CONFIG_TACQ_Pos) |
|
||||
(SAADC_CH_CONFIG_BURST_Enabled << SAADC_CH_CONFIG_BURST_Pos);
|
||||
NRF_SAADC->CH[0].PSELP = SAADC_CH_PSELP_PSELP_VDDHDIV5;
|
||||
NRF_SAADC->CH[0].PSELN = SAADC_CH_PSELN_PSELN_NC;
|
||||
NRF_SAADC->RESULT.PTR = (uint32_t)&result;
|
||||
NRF_SAADC->RESULT.MAXCNT = 1;
|
||||
NRF_SAADC->ENABLE = SAADC_ENABLE_ENABLE_Enabled;
|
||||
|
||||
if (!calibrated) {
|
||||
trigger(NRF_SAADC->TASKS_CALIBRATEOFFSET, NRF_SAADC->EVENTS_CALIBRATEDONE, 10);
|
||||
calibrated = true;
|
||||
}
|
||||
trigger(NRF_SAADC->TASKS_START, NRF_SAADC->EVENTS_STARTED, 5);
|
||||
trigger(NRF_SAADC->TASKS_SAMPLE, NRF_SAADC->EVENTS_END, 5);
|
||||
trigger(NRF_SAADC->TASKS_STOP, NRF_SAADC->EVENTS_STOPPED, 5);
|
||||
NRF_SAADC->ENABLE = SAADC_ENABLE_ENABLE_Disabled; // ADC off between readings
|
||||
|
||||
int32_t raw = result;
|
||||
return raw < 0 ? 0 : raw * 6000L / 4096L; // raw/4096 * 1.2 V * 5
|
||||
}
|
||||
|
||||
// =====================================================================
|
||||
// BTHome v2 advertisement (objects in ascending ID order: 0x0C, 0x2E, 0x45)
|
||||
// =====================================================================
|
||||
static void updateAdvertising() {
|
||||
const uint8_t sd[] = {
|
||||
0xD2, 0xFC, // UUID 0xFCD2 (little endian)
|
||||
0x40, // BTHome v2, unencrypted, regular interval
|
||||
0x0C, uint8_t(g_battMv), uint8_t(g_battMv >> 8), // voltage, 1 mV
|
||||
0x2E, g_rh, // humidity, 1 %, uint8
|
||||
0x45, uint8_t(g_temp10), uint8_t(uint16_t(g_temp10) >> 8) // temperature, 0.1 °C, sint16
|
||||
};
|
||||
Bluefruit.Advertising.stop();
|
||||
Bluefruit.Advertising.clearData();
|
||||
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
|
||||
Bluefruit.Advertising.addData(BLE_GAP_AD_TYPE_SERVICE_DATA, sd, sizeof(sd));
|
||||
Bluefruit.Advertising.addName();
|
||||
Bluefruit.Advertising.start(0); // advertise forever
|
||||
}
|
||||
|
||||
// force = publish even if the measurement failed (used once at boot)
|
||||
static void measureAndPublish(bool force = false) {
|
||||
if (readSHT41()) {
|
||||
g_battMv = readBatteryMv(); // read right after sensor load
|
||||
} else if (!force) {
|
||||
return; // keep advertising last good values
|
||||
}
|
||||
updateAdvertising();
|
||||
}
|
||||
|
||||
// =====================================================================
|
||||
void setup() {
|
||||
// No Serial.begin(): USB stays unused (it is unpowered on battery anyway)
|
||||
|
||||
// DC/DC on both regulators – write directly while SoftDevice is still off
|
||||
uint8_t sdOn = 0;
|
||||
sd_softdevice_is_enabled(&sdOn);
|
||||
if (!sdOn) {
|
||||
NRF_POWER->DCDCEN0 = 1; // REG0: VDDH -> VDD
|
||||
NRF_POWER->DCDCEN = 1; // REG1: VDD -> core
|
||||
}
|
||||
|
||||
sensorOff();
|
||||
|
||||
// TWIM settings are retained while disabled; pins are only taken over when ENABLE is set
|
||||
NRF_TWIM0->PSEL.SCL = SENS_SCL_PIN;
|
||||
NRF_TWIM0->PSEL.SDA = SENS_SDA_PIN;
|
||||
NRF_TWIM0->FREQUENCY = TWIM_FREQUENCY_FREQUENCY_K400;
|
||||
NRF_TWIM0->ADDRESS = SHT41_ADDR;
|
||||
NRF_TWIM0->TXD.PTR = (uint32_t)g_i2cBuf;
|
||||
NRF_TWIM0->TXD.MAXCNT = 1;
|
||||
NRF_TWIM0->RXD.PTR = (uint32_t)g_i2cBuf;
|
||||
NRF_TWIM0->RXD.MAXCNT = 6;
|
||||
|
||||
Bluefruit.autoConnLed(false); // no blinking LED while advertising
|
||||
Bluefruit.begin();
|
||||
sd_power_dcdc_mode_set(NRF_POWER_DCDC_ENABLE); // keep REG1 DC/DC on under SoftDevice
|
||||
Bluefruit.setTxPower(TX_POWER_DBM);
|
||||
Bluefruit.setName(DEVICE_NAME);
|
||||
|
||||
Bluefruit.Advertising.setType(BLE_GAP_ADV_TYPE_NONCONNECTABLE_NONSCANNABLE_UNDIRECTED);
|
||||
Bluefruit.Advertising.setInterval(ADV_INTERVAL, ADV_INTERVAL);
|
||||
Bluefruit.Advertising.restartOnDisconnect(false);
|
||||
|
||||
measureAndPublish(true); // start advertising even if first read fails
|
||||
}
|
||||
|
||||
void loop() {
|
||||
delay(MEAS_INTERVAL_MS); // tickless idle -> System ON sleep
|
||||
measureAndPublish();
|
||||
}
|
||||
Reference in new issue
Block a user